geo-FENNEL FL 70 Premium-Liner SP Mode D'emploi page 21

OPERATION
Set up the laser
1. On a tripod: Connect the laser to the 5/8" retaining bolt of a builder's tripod.
2. On the floor: Set up the laser on its floor tripod. Fine adjustment with the adjustable tripod legs.
Set up the instrument as upright as possible by means of vial to allow the self-levelling system to func-
tion within the range.
POWER ON
Power on the laser by pressing button (7). The instrument is now ready for use (the keypad is illumina-
ted). An audible and optical (blinking lines) alarm indicates if the instrument was set up outside of the
compensator range. If so, set up the instrument on a more even surface.
To power off the laser press button (7) again. The instrument is now powered off.
5/8" adapter
Center the ciruclar
bubble
EN
C
21