ELNA lotus Mode D'emploi page 36

z
q
x
w
e
c
v
• Needle Threader
Turn OFF the power switch when using the needle
threader.
z Lower the presser foot. Raise the needle to its
highest position. Pull down the needle threader
knob q as far as it will go. The hook comes out
through the needle eye from behind.
q Knob
w
x Draw the thread from guide (a) e to guide (b) r
and under the hook w. Draw the thread up along
the right side of guide (b) r and slip the thread in
between guide (b) and the holder plate t.
t
r
c Raise the knob in the direction of the arrow,
drawing the thread loop through the needle.
v Pull the thread through the needle eye.
NOTE:
The needle threader can be used with a #11 to #16
needle or a blue tipped needle. Thread sizes 50 to 90
are recommended.
32
CAUTION:
w Hook
e Guide (a)
r Guide (b)
t Holder plate