Troubleshooting - Sharp MD-MT877H Mode D'emploi

Troubleshooting

Many potential "problems" can be resolved by the owner without calling a service technician.
If something seems to be wrong with this product, check the following before calling your authorised SHARP dealer or
service centre.
PROBLEM CAUSE
The unit does not ● Is the AC adaptor disconnected?
turn on. ● Is the battery exhausted?
● Is the unit in the hold mode?
● Has condensation formed inside the
unit?
● Is the unit being influenced by me-
chanical shock or by static electricity?
No sound is ● Is the volume set too low?
heard from the ● Is the remote control unit or the ear-
earphones. phones plugged in?
● Are you trying to play a MiniDisc with data
on it instead of a MiniDisc containing
music?
When the opera-
● Is the unit in the hold mode?
tion buttons are Is the battery exhausted?
●
pressed, the unit ● Is the remote control unit plug or the
does not respond. earphones plug inserted firmly?
Some sounds
● Is the battery exhausted?
are skipped.
● Is the unit being subjected to exces-
sive vibration?
E-49
PROBLEM CAUSE
The MiniDisc can- ● Has the track number or character
not be ejected. information been updated on the disc
yet?
● Is the unit in the recording or editing
mode?
Recording and ● Is the MiniDisc protected against ac-
editing are im- cidental erasure?
possible. ● Is the unit connected properly to the
other equipment?
● Is the AC adaptor unplugged or did a
power failure occur whilst recording or
editing?
● Is the unit in the hold mode?
● Is an optical signal being output from
the stereo system?
Read the operation manual for the
stereo system.
The battery cannot ● Is the select switch for charging/
be charged. operation set on the charging side?
● Is the socket clean?
Nothing appears ● Is the remote control display set to
on the remote "LIGHT OFF"?
control display.