Sharp MD-MT877H Mode D'emploi page 144

Checking Displays (continued)
To display the playing time of an individual
track
1
Whilst in the stop mode, press the 5
4 button to display the track number and 4 4 4 4
track name.
Track number
Track name
2
Press the DISP button to display the play-
ing time for that track.
Playing time
Each time the 5 or 4 button is pressed, the play-
ing time of the previous or next track will be displayed.
E-33
Checking the remaining amount of bat-
tery level
The remaining amount of battery level is shown
by the battery indicator (
5 or 5 5 5
How to read the battery indicator
When the battery
level is high
When the battery is completely discharged, the battery
indicator will flash. Recharge the battery or replace the
alkaline battery with a new one.
When the battery has run completely out, "BATT EMPTY
(LoBATT)" will appear. Then, the power will be discon-
nected automatically.
Notes:
If you use the battery which you stopped charging half-
way, " " may appear. It does not mean that the battery
is completely charged.
The battery indicator will not correctly display the remain-
ing capacity for approximately 20 seconds after the power
has been turned on.
When the AC adaptor or a separately available car adap-
tor is used, the battery indicator will not be shown.
The number of bars shown in the battery indicator may
increase or decrease, depending on the operation being
performed. This is normal.
) during operation.
When the battery
level is very low