Titling A Minidisc - Sharp MD-MT877H Mode D'emploi

Titling a MiniDisc

Creating disc and track names
Load a MiniDisc to be named. A playback-only or recording
prevented MiniDisc cannot be edited.
1
Disc name Track name
Whilst in the pause Whilst in the pause
mode with "DISC" dis- mode, press the EDIT
played, press the EDIT button repeatedly to se-
button repeatedly to lect "TRACK NAME".
select "DISC NAME".
If "DISC" is not displayed, you cannot select "DISC
NAME."
"DISC" is displayed when the • ■/:OFF is pressed
once.
2
Press the ENTER button.
Cursor
● The unit will enter the character input mode.
To cancel the operation, press the • ■/:OFF but-
●
ton.
3
Press the DISP button repeatedly to select the
type of characters.
(Capital letters) (Lower-case letters) (Numbers and symbols)
The first 3 characters in the group of the selected char-
acters will be displayed for about 1 second.
4
Press the 5 5 or 4 5 5 5 4 4 4 button repeatedly to 4
select the letter.
5
Press the ENTER button to enter it.
Position where the next letter will be entered
6
To enter more letters, repeat steps 3 - 5.
Continued to the next page
E-36