Additional information
Symptoms
The folders/files stored on a
USB memory device are not
displayed.
A USB memory device is not
recognized.
A USB memory device is
connected and displayed, but
the audio files stored on the
USB memory device cannot
be played back.
Displayed Messages
General
Message
C a n ' t u s e
d u r i n g
" S A C D "
C a n ' t u s e
d u r i n g
" T h i s F u n c t i o n "
C a n ' t u s e
d u r i n g
" W a k e - u p "
C a n ' t u s e
d u r i n g
" T r a y L o c k "
E EP ROM Error
Causes
The folders/files are currently stored in
a region other than the FAT (File
Allocation Table) region.
The number of levels in a folder is more
than 8.
There are more than 2000 folders/files
stored in a single folder.
The audio files are copyrighted.
The USB memory device does not
support the mass storage class
specifications.
A USB hub is currently being used.
This receiver recognizes the USB
memory device as a fraud.
Some formats of a USB memory
device, including FAT 12, NTFS, and
HFS, cannot be played back on this
receiver.
The file format cannot be properly
played back on this receiver.
Description
• Displayed when you press SOUND or SOUND RETRIEVER while listening to audio from an
SACD source.
• Displayed when you press DIGITAL NR when listening to functions other than LINE, PHONO,
XM Satellite Radio, SIRIUS, or TUNER.
• Displayed when you press SLEEP while a Wake-Up timer is on.
OPEN/CLOSE on the front panel for about eight seconds. Then the tray can
• Press and hold
be opened/closed using
OPEN/CLOSE.
• Contact your Pioneer authorized service center or your dealer for servicing.
Remedies
Store the folders/files in the FAT region.
Limit the maximum number of levels in a folder to
8 (page 26).
Limit the maximum number of folders/files stored
in a single folder to 2000 (page 26).
Copyrighted audio files stored on a USB memory
device cannot be played back (page 26).
Try using a USB memory device compatible with
the mass storage class specifications. Note that
there are cases where even the audio files stored
on a USB memory device compatible with the
mass storage class specifications are not played
back on this receiver (page 20).
Connect the USB memory device and switch on
this receiver (page 20).
This receiver does not support a USB hub
(page 20).
Switch off and on again this receiver.
Check whether the format of your USB memory
device is either FAT 16 or FAT 32. Note that the FAT
12, NTFS, and HFS formats cannot be played back
on this receiver (page 20).
See the list of file formats that can be played back
on this receiver.
11
41
En