Saving Channel Presets; Using The Xm Menu - Pioneer ELITE X-Z9 Mode D'emploi

Other connections
07

Saving channel presets

This receiver can memorize up to 30 channels, stored in
three banks, or classes (A, B and C) of 10 stations each.
1 Select the channel you want to memorize.
See Selecting channels and browsing by genre above.
2 Press T.EDIT .
The display shows a blinking memory class.
3 Press CLASS to select one of the three classes then
press to select the channel preset you want.
You can also use the number buttons to select a preset.
• The default for all presets is XM001.
4 Press ENTER .
After pressing ENTER, the preset class and number stop
blinking and the receiver stores the XM channel.
Tip
• You can also press MEMORY during reception
display to save the information of up to 5 songs. See
Using the XM Menu right to recall this information.
Listening to channel presets
You will need to have some presets stored to do this.
1 Press CLASS to select the class in which the channel
is stored.
Press repeatedly to cycle through classes A, B and C.
2 Press to select the channel preset you want.
• You can also use the number buttons on the remote
control to recall the channel preset.
30
En

Using the XM Menu

The XM Menu provides additional XM Radio features.
1 Press TOP MENU .
2 Use to select a menu item then press ENTER .
Choose between the following menu items:
• Memory Recall – Use
song information (See Tip above)
• Channel Skip/Add – Use
channels you would like to remove/restore from/to
the channel guide.
• Antenna Aiming – Check the strength of satellite
and terrestrial reception.
3 When you're finished press TOP MENU to return to
the reception display.
Connect & Play™, XM-Ready
trademarks of XM Satellite Radio Inc. ©2005 XM Satellite
Radio Inc. All rights reserved. All other trademarks are the
property of their respective owners.
to browse your saved
and ENTER to select
®
and The Ultimate Playlist are