Turning Off - Enders COMMERCIAL Manuel D'installation Et D'utilisation

GB
4.
CAUTION: When starting and stopping the device can be slight explosion at the burner.
!
tance to the burner.
1. Open the regulator valve.
2.
button pressed for another 10 seconds. This brings the burner up to the necessary operating
temperature.
3. In the rare case that the heater does not ignite after the piezo-ignition button has been pressed
4 or 5 times, repeat the procedure after 2 minutes.
NOTE:
i
ted through the burner base openings.
5.

TURNING OFF

1. To switch of the device, close the regulator valve.
G
F
22
-
-