Malfunctions And Solutions - Enders COMMERCIAL Manuel D'installation Et D'utilisation

COMMERCIAL
6.
Turn the patio heater off and leave it to cool. Close the regulator valve. Remove the pressure re-
gulator with the gas hose from the gas canister. Always check that the sealants are intact.
CAUTION: If you discover or suspect any damage when checking for leaks please contact
!
i
Store the patio heater in a dry place.
7.
To dispose of the patio heater disassemble it.
Separate the parts for recycling including metals, plastic, packaging and the entire burner.
8.

MALFUNCTIONS AND SOLUTIONS

PROBLEM: The patio heater does not ignite.
SOLUTION: The patio heater contains a tilt prevention device, making possible to encapsulate
the gas feed can in a globe during transportation. In order to activate the gas feed,
shake the burner head lightly to propel the globe back to its original position and
ensure a proper supply of gas.
Battery size: AAA 1.5V
If the flame on the burner can no longer be ignited
with the initiator, the battery must be replaced. To
open, turn the cap of the initiator to the left (coun-
ter-clockwise). Replace the empty battery with a
fresh battery and screw the cap of the initiator on by
turning clockwise.
Do not dispose of the empty battery in the household
waste, but rather deliver it to a battery collection
center.
23
5500623
outdoor living