Important Safety Instructions; Fcc Information - Denon DN-X500 Mode D'emploi

ENGLISH DEUTSCH FRANCAIS
• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHEROUTLET ULESS THE BLADES CAN BE FULLY INSERTED TO PRESENT
BLADE EXPOSURE.
• TO PREVENT FIRE OR SHOCK HAZARD.
MOISTURE.
• TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT FULLY INSERT.
RISK OF ELECTRIC SHOCK
The lightning flash with Warning: To reduce the risk of electric
arrowhead symbol, within an shock, do not remove cover (or back).
equilateral triangle, is no user serviceable parts inside. refer
intended to alert the user to servicing
the presence of uninsulated pesonnel.
"dangerous voltage" within
the product's enclosure that
may be of sufficient
magnitude to constitute a risk
of electric shock to persons.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
15) This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be
placed on apparatus.
ITALIANO ESPAÑOL NEDERLANDS
WARNING
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
CAUTION
DO NOT OPEN
The exclamation point within
an equilateral
intended to alert the user to
to qualified service the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
SVENSKA
CAUTION:
1. Handle the power supply cord carefully
Do not damage or deform the power supply cord.
If it is damaged or deformed, it may cause electric
shock or malfunction when used. When removing
from wall outlet, be sure to remove by holding the
plug attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the
top cover.
If problems occur, contact your DENON dealer.
3. Do not place anything inside
Do not place metal objects or spill liquid inside the
DJ mixer.
Electric shock or malfunction may result.
triangle is
Please, record and retain the Model name and
serial number of your set shown on the rating
label.
Model name DN-X-500 Serial No.
Model name DN-X-900 Serial No.

FCC INFORMATION

(For US customers)
1. PRODUCT
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
product may not cause harmful interference, and (2) this
product must accept any interference received, including
interference that may cause undesired operation.
2. IMPORTANT NOTICE: DO NOT MODIFY THIS
PRODUCT
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modification not expressly approved by DENON may void
your authority, granted by the FCC, to use the product.
3. NOTE
This product has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This product generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
product does cause harmful interference to radio or
television reception, which can be determined by turning the
product OFF and ON, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the product into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the local retailer authorized to distribute this type
of product or an experienced radio/TV technician for help.