Fitting Your Pet Door - Petsafe Staywell 600 Série Guide D'installation

Fits brick walls
b) In Walls
Follow the instructions for "Wood and PVC/uPVC/Metal" by using the
enclosed cutting template. Please note that additional tools, materials and
competent DIY skills may be required.
FOR SAFETY REASONS IT IS NOT RECOMMENDED TO FIT THIS
PRODUCT TO GLASS.

Fitting your pet door

Your PetSafe pet door is fi tted with the closing panel
®
on the inside of your house.
FIG.4
Temporarily, hold the inside frame
(with fl ap) in position and mark
the screw holes with a pencil.
FIG.5
Remove frame and using
a 7mm (1/4") drill bit,
drill holes as indicated.
Sleeves (4 pcs.)
Fitting and adjusting the
fl exible fl ap
FIG.7
The fl exible fl ap is
adjustable to fi t into
frame correctly.
Your PetSafe
Replacement fl aps available online
FIG.6
Fit outside frame in cut-out and
Outside Frame
place threaded sleeves through
holes in frame and door. Place
Inside Frame
inside frame in cut-out. Thread
plastic screws through holes in
frame (do not overtighten). Cut
off excess plastic screws, being
careful not to damage the outer
frame / sleeve.
Remove if necessary.
Plastic Screws (4 pcs.)
FIG.8
Horizontal
adjustment
Move fl ap left or right
to adjust position.
Tighten screws
when correct.
pet door is now ready to use.
®
FIG.9
Vertical
adjustment
Move fl ap up or down
to adjust position.
Tighten screws
when correct.
5