Dell Precision 3240 Compact Manuel De Maintenance page 49

Steps
1. Align the riser card and push it down on the PCIe connector of the system board.
2. Tighten the screws (M2x4) that secure the riser card to the system chassis.
Next steps
1. Install the fan assembly.
NOTE: This step is valid for system configuration that is shipped with 80 W CPU.
2. Install the front bezel.
3. Install the top cover (side
4. Install the side cover.
5. Follow the procedure in
bezel).
after working inside your computer.
Démontage et remontage 49