4. Install the
side
cover.
5. Follow the procedure in
Haut-parleur
Removing the speaker
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
top cover (side
4. Remove the
front
bezel.
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the system board.
2. Press the release tab and lift the speaker along with the cable from the system board.
Installing the speaker
Prerequisites
Si vous remplacez un composant, retirez le composant existant avant d'exécuter la procédure d'installation.
About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
40
Démontage et remontage
after working inside your
computer.
before working inside your
bezel).
computer.