Steps
1. Insert the hard drive assembly into the slot on the system.
2. Slide the hard drive assembly towards the connector in the system board until the release tabs clicks into place.
Next steps
1. Install the
front
bezel.
2. Install the
top cover (side
3. Install the
side
cover.
4. Follow the procedure in
Disque SSD
Removing the M.2 2280 PCIe solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
bezel).
after working inside your
computer.
before working inside your
computer.
Démontage et remontage
35