Steps
1. Connect the antenna cables to the WLAN card.
The following table provides the antenna-cable color scheme for the WLAN card of your computer.
Table 8. Antenna-cable color scheme
Connectors on the
wireless card
Main
Auxiliary
2. Place the WLAN card bracket to secure the antenna cables.
3. Align the notch on the WLAN card with the tab on the WLAN card slot. Insert the WLAN card into the connector on the system
board.
4. Replace the (M2x3.5) screw to secure the WLAN card bracket to the WLAN card.
Next steps
1. Install the
hard-drive
assembly.
2. Install the
front
bezel.
3. Install the
top cover (side
Antenna-cable color
White
Black
bezel).
Silkscreen marking
MAIN
AUX
△ (white triangle)
▲ (black triangle)
Démontage et remontage
39