Steps
1. Place the hard drive into the bracket.
2. Align and insert the pins on the drive bracket with the slots on the drive.
NOTE:
Note the orientation of the hard drive so that you can replace it correctly.
Next steps
1. Install the
2.5 in. hard-drive
2. Install the
front
bezel.
3. Install the
top cover (side
4. Install the
side
cover.
5. Follow the procedure in
Installing the 2.5 in. hard drive assembly
Prerequisites
Si vous remplacez un composant, retirez le composant existant avant d'exécuter la procédure d'installation.
About this task
The following image indicates the location of the hard drive assembly and provides a visual representation of the installation procedure.
34
Démontage et remontage
assembly.
bezel).
after working inside your
computer.