Troubleshooting; Battery Replacement - Amprobe AC75B Mode D'emploi

Troubleshooting

If the meter appears to operate improperly, check the following items first.
1. Review the operating instructions to ensure the meter is being used
properly.
2. Make sure the battery is in good condition. The low battery symbol N
appears when the battery falls below the level where accuracy is
guaranteed. Replace a low battery immediately.

Battery Replacement

To replace the battery
1. Turn the meter off and remove the test leads.
2. Loosen the screw and remove the battery door.
3. Replace the battery using an alkaline 9 V battery. See General
Specifications for detailed battery specifications.
4. Replace the battery cover and tighten the screw. Recycle the battery
using approved methods.
To avoid electrical, shock remove the test leads from both the meter and
the test circuit before accessing the battery or the fuses.
XWWARNING
5