Putting The Device Into Operation - Geberit AQUACLEAN SELA Instructions De Montage

EN
12
Launch the [Water hardness] menu. Set the
hardness value in accordance with the local
water hardness.
Water hardness
Range
soft
medium
hard
Set to [hard] if you do not know the local
water hardness.
13
Launch the [Basic settings] menu.
Basic settings
Result
✓ The settings are saved.
✓ The device is installed correctly.
38
hard
Commissioning

Putting the device into operation

Prerequisite
– The function test of the remote control was
performed successfully.
– The device is installed correctly.
1
Remove the spray shield.
2
Clean the device.
3
Close the WC seat and WC lid.
Result
✓ The device is ready for operation and can be
handed over to the customer.
45035999965553803-1 © 02-2019
970.057.00.1(00)