Hach TitraLab KF1000 Série Manuel D'utilisation Simplifié page 17

Section 6 User interface and navigation
6.1 Keypad
1 Power
2 Printer
Key Description
Power Sets the instrument power to on or off. Push the key for 2 seconds to set the
power to off.
Printer The printer key only operates if a printer is connected to the instrument. Sends
the data currently shown on the display to a connected printer when pushed. A
sound is heard if the current display cannot be printed. A graph is automatically
printed at the end of the measurement, if the option is selected (Settings >
Options).
Selection keys Used to select options shown above them in the footer bar. The options
(contextual) available are applicable to the current operation (e.g. calibration, measurement,
etc.).
Navigation keys Scrolls through menus and data, enter numbers and letters, enter checkbox
settings and set options for the syringe and the pump.
Home Push this key at any time to go directly to the home screen. A sound is heard if
the key is disabled (e.g. during a calibration or measurement).
3 Selection keys
4 Navigation keys
5 Home key
English 17