Initial Settings; Adjusting Initial Settings; Selecting The Display Language; Setting The Clock - Pioneer PREMIER SUPER TUNER III D+ DEH-P800PRS Mode D'emploi

Section
14

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press MULTI-CONTROL and hold until
Language select appears in the display.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL to switch between the
functions in the following order.
Language select (language selection)—Clock
(clock)— Warning tone (warning tone)—
Face auto open (face auto open)—AUX1
(auxiliary input 1)—AUX2 (auxiliary input 2)—
Dimmer (dimmer)—Brightness (brightness)
—Illumination (illumination color)—
Digital ATT (digital attenuator)—Audio Reset
(audio reset)—Mute (sound muting/attenua-
tion)—Internal AMP (power amp setting)—
Demonstration (feature demo)—
Reverse mode (reverse mode)—Ever-scroll
(ever scroll)
Use the following instructions to operate each
particular setting.
# You can also switch between the functions in
reverse order by turning MULTI-CONTROL coun-
terclockwise.
# To cancel initial settings, press BAND.
70
En
1 1 1

Selecting the display language

For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
1 Use MULTI-CONTROL to select
Language select.
Language select appears in the display.
2 Press MULTI-CONTROL to select the lan-
guage.
Each press of MULTI-CONTROL selects lan-
guages in the following order:
English—Français—Español

Setting the clock

Use these instructions to set the clock.
1 Use MULTI-CONTROL to select Clock.
Clock appears in the display.
2 Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the clock display:
Hour—Minute
As you select segments of the clock display,
the selected segment blinks.
3 Push MULTI-CONTROL up or down to
put a clock right.
Pushing MULTI-CONTROL up will increase
the selected hour or minute. Pushing
MULTI-CONTROL down will decrease the se-
lected hour or minute.