Serial Numbers - Peg-Perego Ypsi Bassinet Notice D'emploi

position (fig_a). To lower it, press the two side buttons
simultaneously and rotate it downwards (fig_b).
14 The handle is useful for carrying and fastening the Ypsi
Bassinet onto the chassis (fig_a). To lift the bassinet, use
the grip area on the handle bar (fig_b).
15 ADJUSTING THE BACKREST: thanks to the COMFORT
SYSTEM the backrest can be adjusted in 3 positions by
pulling and fastening the adjustment belt in the desired
position, as shown in the picture
16 ALL SEASONS SYSTEM: this system allows to adjust internal
air circulation in order to prevent condensation. To
adjust as required, lift the seat (fig_a) and extract the air
circulation panel (fig_b).
17 Rotate the air circulation panel (fig_a) so that the openings
overlap (or cover) the openings on the bottom of the
bassinet. If they match, air flows through. Lastly, slide the
panel into the seat (fig_b).
T-MATIC SYSTEM
18 The T-Matic System is the quick, practical system that
allows you to attach the Ypsi Bassinet onto the Ypsi
Chassis, using the T-MATIC fastenings.
19 To unfasten the Ypsi Bassinet, pull out the tab on the back
(fig_a) and lift (fig_b).
Removing the soft cover
20 Remove the foot muff by opening the zip that keeps it
fastened to the bassinet's padding.
21 Remove the mattress and take off the mattress case.
22 Open the zip that keeps the hood fastened to the
bassinet's padding (fig_a). Next, press the two buttons on
the sides of the handle bar and remove the hood (fig_b).
23 Remove the padding by opening the zips that keep it
fastened to the bassinet frame.
24 Remove the belt that adjusts the backrest in the various
positions.
25 Lift the backrest (fig_a), then pull out the mattress until you
access the two eyelets in which the ends of the belt are
inserted (fig_b). Slip them out (fig_c).
26 Remove the belt (fig_a) and then extract the mattress from
the backrest (fig_b).
Folding
27 Remove the foot muff, the hood, the mattress and the
internal lining. Lift the backrest (fig_a), unfasten the metal
rod and rotate it upwards (fig_b). Lower the backrest and
then the metal rod.
28 Lift the seat (fig_a) and, using the latch, release the metal
rod (fig_b) and fold it (fig_c). Lastly, lower the seat so that
the Ypsi Bassinet folds.

Serial numbers

29• Information about the production date of Ypsi Bassinet can
be found under the base.
• Product name, production date and serial number.
This information is required for any complaints.
The Original Accessory Peg Perego
Peg-Pérego accessories are designed as a useful, practical
means of simplifying the lives of parents. Discover all your
product's accessories on www.pegperego.com
Padding cleaning instructions
• When washing, closely follow the instructions stated on
the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
Product cleaning
• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
• Keep all moving parts clean and if necessary lubricate
them with light oil.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
17