Selecting The Place Of Installation - IARP CF700 Instructions D'emploi Et D'entretien

HANDLING
The unit is shipped anchored onto a wooden base and protected by corner posts, cardboard top and
nylon wrapping. Movement should be carried out exclusively using a forklift of adequate power for
the weight of the appliance: during this operation, the appliance must be positioned on the specific
pallet provided (pallet should be kept for subsequent movements).
WARNING! Free the appliance from the packaging by removing the screws fastening
the pallet to the wood.

SELECTING THE PLACE OF INSTALLATION

In selecting the place of installation, ensure that the following instructions are observed, this being vital for
proper and troublefree working of the cabinet:
• Do not install the cabinet outdoors.
• Do not install the cabinet in the vicinity of heating radiators or other heat sources.
• Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
• Do not install the cabinet where it is exposed to drafts from ventilators open doors.
• Pay attention to air outlet from air conditioners/ ventilators.
• Keep the air intake and outlet area around the plinth area of the cabinet clear of cartons and other obstacles.
• It is necessary taht the condensing unit obtains a good circulation of air around it; also the area around
the condensing unit should not be obstructed by boxes or other objects; keep a distance from the wall
of 10 cm. at least.
Air-Condition
-13-