Fuse Replacing; Status Messages - Antari F-5 Fazer Manuel D'utilisation

FUSE REPLACING

Disconnect AC power before replacing fuse. Only replace fuse with same type and
rating.
Step 1: disconnect power cord from supply
Step 2: use a flat-head screwdriver to release fuse holder
Step 3: Replace fuse with exact same type and rating as indicated below
Step 4: Reinsert fuse holder

STATUS MESSAGES

WARMING UP
ANTARI F-5
READY TO FAZE
WARNING !
HEATER OVERHEAT
WARNING !
TEMP ERROR
WARNING !
FLUID BACKFLOW
Machine heating up
Machine ready for operation
Machine has detected overheat on heater unit
and will not operate. Contact your local
distributor for service and support
Machine cannot heat up and will not operate.
Contact your local distributor for service and
support
Detected fluid backflow into air pump, machine
will not operate. Contact your local distributor
for service and support
14