Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
VOLUME
OUTPUT XXX SEC
FAN SPEED
XXX %
DMX512
ADRESS : XXX
SEC
W-DMX POWER
W-DMX RESET
AIR PUMP SENSOR
RUN LAST SETTING
DMX CONNECTOR PIN ASSIGNEMENT
The machine provides 3 or 5 pin XLR connector for DMX connection. Diagram below
indicate pin assignment information.
Making the DMX connection: connect machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses a 3-pin or a 5-pin XLR connector for
DMX connection, the connector is located on the front of the machine.
Set output volume from 1 to 100%
Set fan speed from 20 to 100%
DMX512
ADRESS : XXX
SEC
Turn on/off W-DMX
XX
Unlink from a W-DMX transmitter
XX
Turn on/off air pump sensor
XX
Turn on/off run last setting function
XX
Set DMX/W-DMX address from 1 to 511
12
Publicité
Table des Matières
