Table des Matières
Publicité
EN
+
instructions for use.
Scope of delivery
Technical data
Type of device
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty
Material of tank
Where device is carried
Technical residual quantity
Table 1
Assembly
Checks
Visual inspection:
+
coupling and to the condition of the pump thread.
No leaks:
Pump up the empty device to 2 bar (Fig. 9).
Function:
Pull up the piston pressure gauge [6]
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
Preparation
Observe the instructions in the section entitled „Safety".
The device must be in an upright position.
into the tank.
1. Pull up the red button on the piston pressure gauge [6] until all excess pressure is
released from the tank.
2. Press the piston rod with handle [7] down and turn it counterclockwise
3. Unscrew the pump [2] from the tank.
4. Add the liquid to the tank [1]. (Fig. 6)
. (Fig. 1)
10 l (2.64 gal)
12.5 l (3.3 gal)
3 bar (43.5 psi)
40 °C (104 °F)
2.8 kg (6.16 lb)
<0.07 l (< 0.02 gal)
(Fig. 4)
(Fig. 6)
14
ENGLISH
3270..
polyethylene
on the side
(Fig. 2)
Publicité
Table des Matières
