Scope Of Delivery; Technical Data - Mesto CLEANER 3275PP Mode D'emploi

GB IRL
Repairs and modifications to the tank are not permitted.
The effect of the safety valve must not be bypassed or made inoperative.
Avoid ignition sources in the environment if you spray combustible liquids.
Do not allow the device to remain under pressure and/or exposed directly to
sunlight. Make certain the device is not heated beyond the maximum operating
temperature (→Table 1). Protect the device from frost.
Never blow through the nozzles or valves with your mouth.
Use only MESTO spare and accessory parts.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the piston pressure gauge to ensure the maximum
spraying pressure is not exceeded (→ Table 1 below).
Before filling, after use and before maintenance work, allow the residual pressure in
the tank to dissipate completely (→ Section "After Use", Section 1).

Scope of delivery

Tank [1], pump [2], hose [3], instructions for use [4], lever set [5] (only for CLEANER
3275PP, 3270PP), spray wand [6], shut-off valve [7], carrying strap [8]. (Figs. 1a and 1b)
You will find the illustrations referred to above in the front fold-out pages 3 – 5 of these
instructions for use.

Technical data

Type of device
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty
Material of tank
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Pressure change from 0 to 3 bar
(43.5 psi)
Table 1
AUS USA
CLEANER 3270PP, PE
PROFI PLUS 3270P
10 l (2.2 gal)
12.5 l (2.75 gal)
3.25 kg (7.15 lb)
13
NZ CDN
CLEANER 3275 PP, PE
PROFI PLUS 3275P
5 l (1.1 gal)
8 l (1.8 gal)
3 bar (43.5 psi)
40 °C (104 F)
2.8 kg (6.16 lb)
Polyethylene
on the side
< 0.07 l (< 0.02 gal)
1 l/min (0.22 gal/min)
< 5 N
min. 5000 x
IND