Table des Matières
Publicité
EN
6. Screw the pump [2] into the tank. (Fig. 7)
7. Press the piston rod with handle [7] down and turn it clockwise.
8. Create the desired pressure in the tank. (Fig. 9)
+
9. Press the piston rod with handle [7] down and turn it counterclockwise. (Fig. 4)
Use
Observe the instructions in the section entitled "Safety".
1. Connect the plug-in coupling [9] of the water pressure tank with the plug-in nipple on
your device [10]. (Fig. 10)
2. Activate the ball valve [11]. (Fig. 10)
+
After Usage
Observe the instructions in the section entitled "Safety".
Never leave liquid in the device.
1. Hold the plug-in coupling [9] and pull and simultaneously rotate its outer ring. (Fig. 10)
2. Pull up the red button on the piston pressure gauge [6] until all excess pressure is
released from the tank
3. Lock the piston rod with handle [7]. (Fig. 4)
4. Unscrew the pump [2] from the tank.
place protected from sunlight and freezing temperatures. (Fig. 11)
Care and maintenance
Observe the instructions in the section entitled "Safety".
After using the device 50 times or at least once a year:
•
Unscrew the pump [2] from the tank.
•
Dismantle the pump [2]. (Fig. 12)
•
Grease the O-ring [12] and the diaphragm [13].
•
Assemble the pump.
(Fig. 8)
(Fig. 17)
15
ENGLISH
Fig. 9)
Publicité
Table des Matières
