Siebert S102 Série Manuel D'utilisation page 24

Features
Brilliant LED display
The units are Profibus-DP slaves according EN 50 170.
The address is set with rotary switches (00...99).
The baud rate is recognized automatically. It can be up to 12 MBaud.
The GSD file " SIEB06F8.GSD " on disc is included in the delivery.
In the event of a bus error, minus signs appear in the display.
Parameterization via menu
Block diagram
C6
PWR BUS DATA
Status LEDs
Depending on the version, the units show the following number of characters:
S102-x4/14/0x-00x/0B-K0 (character height 14 mm, 4 digits):
S102-x6/14/0x-00x/0B-K0 (character height 14 mm, 6 digits):
S102-x4/25/0x-00x/0B-K0 (character height 25 mm, 4 digits):
S102-x5/25/0x-00x/0B-K0 (character height 25 mm, 5 digits):
The Profibus interface (9-pin D-Sub socket) has the following assignment:
Pin 1 2
Signal – –
24
C5 C4
Profibus interface
3 4
B –
C3 C2
Address 0 V
00...99 Power supply
5 6
GND + 5V
C1
PE
24 V
C4...C1
C6...C1
C4...C1
C5...C1
7 8
– A
BAL S102 PFB M 1.0
9
–