Beurer 8Sense PC 100 PostureControl Mode D'emploi page 39

2. Connect the USB charging
adapter to the USB extension
cable, or directly to the USB
port on your computer/lap-
top. Whilst charging, the LED
on the posture control lights
up orange. When the battery
of the posture control is fully
charged, the LED goes out. It
usually takes approx. 2 hours to
fully charge the battery. You can
see the current charge status of the posture control in the app
if there is a Bluetooth
3. Pull the USB charging adapter with the posture control out of
the USB port on your computer/laptop.
4. Pull the USB charging adapter out of the side of the posture
control. The posture control is now ready for use.
connection.
®
39