Introduction - ITW Simco-Ion Multi Power Master Notice D'utilisation

1 Introduction

The Multi Power Master (MPM) serves as the power source for Simco-Ion ionisation equipment.
This ionisation equipment is used to discharge electrostatically charged materials. The MPM is
available in 4 output voltage models with a sinusoidal output voltage of 3.3 kV, 4.0 kV,
5.0 kV or 7.0 kV.
LED indicators on the cover show the status of the MPM. An extra option is the MPM with I/O
connector (MPM-xxR). The MPM with I/O connector has a number of remote control functions
(not wireless).
High voltage outputs
Figure 1: MPM
MPM_UM_9752080610_NL_D_GB_F_V3_2
On/off switch
LED indicators
I/O connector
(only with option R)
(only for options)
Power cable
GB
41