Intended Use; Features; Scope Of Delivery; Technical Data - Parkside PTSS 1200 A1 Instructions D'utilisation Et Consignes De Sécurité

Introduction
Plunge Saw PTSS 1200 A1
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.

Intended use

The plunge saw (hereafter referred to as "device"
or "tool") is suitable for placing long or cross cuts,
or plunge cuts in firmly secured solid wood, particle
board, plastic and lightweight construction materials.
The use on ferrous metals is prohibited. The device
may be used with the included guide tracks – solely
for the cutting techniques specified. Any other uses,
and / or modifications to the tool are considered
improper use and may result in serious hazards.
Not for commercial applications.

Features

Switch lock
1
ON / OFF switch
2
Handle
3
Socket head wrench (small)
4
Socket head wrench (large)
5
Motor
6
Chip discharge adapter
7
Micro-adjustment screw for 0 ° cutting angle
8
Micro-adjustment screw for 45 ° cutting angle
8 a
Saw stand
9
Cut line mark
9 a
Eccentric screw
10 2 x
Angle adjustment wheel
11
Depth adjustment
12
30 GB
2 x
Depth scale
13
Saw blade
14
Clamping screw / washer
14 a
Assembly cut-out
14 b
Additional handle
15
Cutting width marker
16
Chip discharge (swivel)
17
Blade change locking lever
18
Spindle lock
19
Notch for guide rail
20
Guide rail
21
Set screws
22
Fastener
23

Scope of delivery

1 Plunge saw
1 Saw blade 165 mm / 24 teeth (installed)
2 Guide tracks
1 Fastener
1 Chip discharge adapter
2 Socket head wrench
1 Set of instructions for use

Technical Data

Device: Plunge Saw PTSS 1200 A1
Rated voltage: 230 V∼, 50 Hz
Rated power input: 1200 W
Idle speed: n ₀ 5200 rpm
Saw blade holder: ø 20 mm
Saw blade: 165 mm
Blade thickness: 1.4 mm
Tooth thickness: 2.6 mm
max. cutting depth: 56 mm at 90 °
mitre square
42 mm at 45 °
mitre square
With guide track
minus 5 mm
Protection class: II /
Accessories: guide track 2 x
700 mm x 180 mm