General Information; Safety Symbols; Pump Identification; Warranty - UDOR PN Série Manuel D'utilisation Et Entretien

1.

GENERAL INFORMATION

1.1

SAFETY SYMBOLS

The "WARNING" symbol here at the side draws the operator's attention to situations
and/or problems related to the correct operation of the Pump.
The "DANGER" symbol here at the side draws the operator's attention to situations
and/or problems that could compromise the safety of people.
1.2

PUMP IDENTIFICATION

1.3

WARRANTY

UDOR guarantees its products for 12 (twelve) months from the date of shipment.
Warranty covers the replacement of parts or products which, to the sole and undisputable judgement
of UDOR, are considered to be defective from the date of shipment. Expenses for labour and
transport are to the charge of the buyer. The product shall only be returned to UDOR following
authorisation from the latter, free of charge to the warehouse of UDOR and complete with every
single original component, without any sign of tampering. Replaced products or components pass
over to the ownership of UDOR.
Warranty of a product is void if the buyer fails to observe the payment terms of the product.
Warranty does not cover the following damages:
 Direct and indirect damages of any kind.
 Damages deriving from the failed observance of safety instructions and standards.
 Damages to products due to: incorrect use, dropping, incorrect installation, exposure to freezing
conditions, failed maintenance, carelessness and negligence during use.
 Damages to parts subject to normal wear and tear.
 Damages to products in the case of the use of non-original parts or parts that are not explicitly
approved by UDOR.
UDOR may add, at any time, any modifications considered necessary to improve the product without
having to apply such modifications to products that have already been sold or that are ready for
shipment.
The warranty herein is the only one valid and replaces all other forms of warranty or guarantee
conditions.
Any controversies will be dealt with according to Italian law by the competent court of Reggio Emilia.
Fig.1
18
The Label on the
Pump bears the
Model, the Code,
the Serial Number
and the main
technical
specifications with
the maximum
operational values
of the product. The
specimen at the
side is an example
of a Label and its
position on the
Pump.