Metabo HPT C 18DSL Instructions De Sécurité Et Mode D'emploi page 18

English
(2) Push the back of the socket, and remove the socket
and the light bulb together from the housing (Fig. 19).
Back of the socket
Housing
(3) Remove the light bulb from the socket (Fig. 20).
Light bulb
Socket
Fig. 20 <Top View>
2. Attaching light bulb
Take procedures here that are contrary to the
detaching procedures.
NOTE
● When attaching the light bulb to the socket, insert the
light bulb until it lightly bumps against the socket.
● When attaching the socket to the housing, align the
socket with the hole of housing while watching the
back of the socket shown in Fig. 20, and insert the
socket until it lightly bumps against the housing.
18
Fig. 19
Housing