Removing The Front Cover - Yamaha MusicCAST MCX-SP10 Mode D'emploi

REMOVING THE FRONT COVER

The front cover is fastened to the enclosure at four
points and can be removed if desired. To remove
the cover, hold on to both sides and slowly pull
straight away from the speaker. To reattach, line up
the four holes on the inner surface of the cover with
the four corresponding pegs on the speaker and
push gently.
Caution
• When the cover is removed, take care not to touch the
speaker units with your hands or to exert excessive force
with tools.
SPECIFICATIONS
Type .................... 2-way bass reflex speaker system
Driver ................................. 10 cm (4") cone woofer
Impedance .......................................................... 4 Ω
Frequency Response .................... 100 Hz to 27 kHz
Nominal Input Power ....................................... 20 W
Sensitivity ....................................... 89 dB/2.83 V/m
Dimensions (WxHxD) .............. 210 x 210 x 79 mm
Weight .................................. 1.2 kg (2 lbs 10oz) x 2
• Specifications are subject to change without
notice due to product improvements.
• Care should be taken not to exceed the input
power values noted above.
4
Magnetic shielding type
2.5 cm (1") dome tweeter
(8-5/16" x 8-5/16" x 3-1/10")