Technical Specifications; Corrective Action - ATIKA FC 40-255 Notice Originale

Fault code
Poor cutting results
Cutting time with fully charged
battery too short
Operating mode cannot be
selected

In case of further faults or inquiries please contact your local dealer.
Type / Model
year of construction
Idle speed n / n
0 max
Cutting diameter with thread spool
Thread diameter / thread length
Cutting diameter with cutting blade
Blade thickness
Sound pressure level L
PA
Measuring uncertainty K
pA
measured sound power level L
Measuring uncertainty K
WA
(according to regulation 2000/14/EC)
guaranteed sound power level L
(according to regulation 2000/14/EC)
Hand arm vibration (measured as per ISO 22867)
Measuring uncertainty K
Weight (without battery)
 Brush cutter
 Grass trimmer
Compatible battery voltage

Refer to the respective "Operating instructions" for "Technical specifications" of the batteries and the charger.
26
Possible Cause
 Grass, weeds, undergrowth too long
 Grass, weeds, undergrowth too dense
 Foreign material, grass wrapped around
the cutting blade
 Cutting blade dull
 Cutting thread too short
 Rechargeable battery is low
 Battery service life exhausted
 Economy / normal mode toggle buttons
defective

Technical specifications

WA
wA

Corrective action

 Trim in several passes
 Reduce the cutting width
 Check / clean the cutting blade
 Turn the cutting blade over or have it
resharpened or replaced
 Replace the cutting thread
 Charging the rechargeable battery
 Replace the rechargeable battery
 Contact the customer service
FC 40-255
see last page
6500 rpm
∅ 330 / 380 mm
∅ 2,5 mm / ca. 170 mm
∅ 255 mm
2.8 mm
82 dB (A)
3 dB (A)
93.4 dB (A)
0.93 dB (A)
96 dB (A)
< 2,0 m/s
2
1,5 m/s
2
≈ 3.6 kg
≈ 3.5 kg
36 V (max 40 V)