Maintenance - Toto ZN TBP01301U Manuel D'installation Et D'utilisation

Check your faucet at least once a month for the following potential problems
and to do the following maintenance procedures:
Inspect for Leakage
� Check all water connections for
signs of leakage.
Tighten the Spout
� If the spout is loose, tighten the
hexagonal nut underneath the spout.
Cleaning the Nozzle Screen and Inlet
Strainer
� When the inlet strainer is clogged
the flow rate will decrease.
Decreased flow rate can lead to
diminished flow.
To clean the nozzle screen:
A
1. Remove the setscrew spout
opening and filter.
2. Remove dirt and debris caught by
the filter using a toothbrush, etc.
3. Mount the setscrew, spout
opening and filter.
B To clean the showerhead strainer:
1. Remove the showerhead from the
shower hose.
2. Pinch the projection and remove
the strainer.
3. Remove dirt and debris caught in
the strainer using a toothbrush,
etc.
4. Mount the strainer in the
showerhead.
5. Mount the showerhead in the
shower hose.

MAINTENANCE

A
1
TBP01301
B
7
TBP02303
2mm
2.5mm