Signal Conditioning - HBM PAD4001A Mode D'emploi

FMD
ASF
A
Filter
D
RUN
BRK
PAD4001A/4003A
3.2

Signal conditioning

SZA
ICR SFA
Samp- Working
ling standard
rate calibration
Dosing control
Fig. 3.2
Digitization is followed by filtering, using digital filters ad­
justed by the software. The command ICR changes the
output rate (measured values per second).
In the working standard calibration of the electronics (on
delivery), 0 mV/V corresponds to zero and the maximum
capacity is either 1,000,000 digits (NOV≠0), or
5,120,000 digits (NOV=0). The two parameters LDW and
LWT give you the opportunity to adapt the characteristic
curve to meet your requirements (scale curve) and you
can use the NOV command to standardize the measured
values to the required scaling value (e.g. 3000 d). De­
tailed information can be found in the command docu­
mentation and in the Online Help for the PanelX pro­
gram.
You also have the opportunity to
S switch from gross to net signals,
A4238-1.0 HBM: public
Structure and mode of operation
NOV, RSN
LDW, LWT
User-defined
scaling
Coarse Flow
Fine Flow
Ready
Alarm
Signal conditioning
LIC TAV, TAS
Lineari−
Tare
zation
Min/
Max
Trigger
Limit
values
Gross
meas.
value
Net
meas.
value
PVA
Extreme
values
IMD
Trigger/
Stop
LIV
Limit
values
11