HBM PAD4001A Mode D'emploi page 6

Safety instructions
4
S The device must not be modified from the design or
safety engineering point of view except with our ex­
press agreement. In particular, any repair or soldering
work on motherboards (exchanging components) is
prohibited.
S The device is delivered from the factory with a fixed
hardware and software configuration. Changes can
only be made within the possibilities listed in the cor­
responding documentation.
S The device is maintenance free.
S Please note the following points when cleaning the
housing:
- Disconnect the device from all current and voltage
supplies before cleaning it.
- Clean the housing with a soft, slightly damp cloth.
Never use solvent, as this could damage the label
or the housing.
- When cleaning, ensure that no liquid gets into the
device or connections.
S In accordance with national and local environmental
protection and material recovery and recycling regula­
tions, old equipment that can no longer be used must
be disposed of separately and not with normal house­
hold garbage, see Chapter 9 on page 27.
Qualified personnel
Qualified persons means persons entrusted with the in­
stallation, fitting, commissioning and operation of the
product who possess the appropriate qualifications for
their function.
This includes people who meet at least one of the three
following requirements:
A4238-1.0 HBM: public
PAD4001A/4003A