Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Rear Panel
Headphone Output
28
The Headphone Output is a 1/4" TRS Z-balanced jack in the master section. These outputs can be used
with Tip, Ring Sleeve (TRS) balanced or Tip Sleeve (TS) unbalanced connectors. The EFX mix is deter-
mined by the amount of signal being sent to the EFX bus in each channel.
Power Adapter Input
29
Use to connect the included power supply. Be sure the power supply is connected to the PV
connecting to a power source. Use 15 V DC, 0.5 A adapter only.
Note: Replace only with Peavey part number 30901986 for Domestic, or 30902780 for Export.
Power Switch
30
Depressing the power switch supplies power to the unit.
Tape In/Out
31
The tape input jacks are designed to accommodate tape‚ CD or computer sound card output levels. The
32
out level is +4 dBu for connection to a recorder or sound card input. The tape inputs can be used as an
additional stereo input by engaging the Tape/USB to Main Mix switch (13). The tape input can also be
used to monitor the recorder/sound card output without the risk of feedback.
USB port and USB Record Level Control (PV
33
The USB port is used to connect the PV
digital audio to/from your computer. The USB port sends the mixer's main/tape stereo out to the computer.
The amount of the main mix signal being sent to the USB port can be adjusted using the Record Level
control located next to the USB port. The USB port receives digital audio from the computer; it can then be
assigned through the "Tape/USB to Mix" switch (13) to the main left/right output. The USB input level is
controlled by the computer volume control.
Compatible with Windows
30
29
®
6 USB only)
®
Series USB mixer to acomputer for recording or playing back
®
Vista, XP, ME & 2000. Also compatible with Mac OS X
11
33
31
32
®
6 before
®
10.0 or later.
Publicité
Table des Matières
