Care And Maintenance; À Bring Into Service - SPIDO SPRING 900 Notice D'utilisation

[

Care and maintenance

The 3 golden rules for care
1) Check regularly the filter of the suction hose, it mustn't be
obstructed. Make sure that suction hose is under 30cm of water or
more, and that it is not closer than 50cm from the bottom of the
liquid in the tank (or bore hole)
2) Check the filter of the pump (5) regularly, and clean it with clear
water if necessary.
3) Disable the pump (as indicated below) as soon as temperature is
getting close to 0°C. Never let the pump in the frost.
When disabling the pump
> Unplug the pump form the mains
> Unscrew the drainage cap to empty the water in the pump
> Store the pump where it is protected from frost
À Bring into service
> Follow the steps of the chapter "before you start
]
"
11