Slim LED Light
Fig. 1
< 3 m
SAFETY INFORMATION
1. The light has to be installed and maintained by a qualified specialist.
2. Electric installations may only be completed complying with the safety regulations (VDE 0100
for Germany).
3. For the connection, a VDE-certified connection line (at least H05RN-F 3G1,0) must be used.
4. The light must be grounded properly.
5. The light must not be used without properly attached sealing rings!
6. LED lights are extremely bright. Please never look directly into the light.
7. If the protective cover is broken, it should be replaced by an original Brennenstuhl protective
cover before further use of the light.
8. If the mains connection line of the light or the connection box is damaged, it must be replaced
by a qualified specialist to avoid any risk.
17P028 Slim LED Strahler 170411.indd 9
90°
100°
The light has to be assembled at a height of
less than 3 m (fig. 1). Recommended assembly
height with models with motion detector 2.5 m.
The light must not be used for other purposes.
B
A
B
Operating instructions
D
C
A
9
11.04.2017 14:31:06