Safety Information; Conformity Declaration - brennenstuhl HARLON 2000 M Mode D'emploi

HARLON 2000 M Mobile LED Light

SAFETY INFORMATION

1. Check the light and power cord for any damage before every use. Do not use the light if
you find any damage.
Caution! There is a risk of electrocution from damaged lights and power cords!
2. To avoid hazards, external flexible cords of this light must be replaced by the manufacturer,
the manufacturer's service representative or a similarly qualified person only.
3. LED lights are extremely bright. Never look directly into the light.
4. The light requires secure and stable footing.
5. Ensure that the cable cannot be crushed or otherwise damaged.
6. Keep children away from the light. Children are unaware of the risks posed by electrical
current.

CONFORMITY DECLARATION

The declaration of conformity is deposited at the manufacturer.
MAINTENANCE
Caution: Shock Hazard
The light source of this lamp must be replaced by the manufacturer or its authorized
service technician or a similarly qualified person only.
CLEANING
Do not use solvents, corrosive cleaners or the like. Clean with a dry or slightly damp cloth only.
DISPOSAL
In accordance with Directive 2012/19/EC on waste electrical and electronic equipment
and the corresponding national law, used electrical equipment must be separated from
the rubbish and reused or recycled in an environmentally responsible manner. Please
contact your local authorities for available disposal options for your disused device.
Addresses
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1 – 3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
6
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
www.brennenstuhl.com