Proper Intended Use; Safety Instructions - brennenstuhl LB 5000 Mode D'emploi

Operating instructions
EN
SMD LED Light
LB 5000 / 5001 / 5002 + LB 8000 / 8001 / 8002

PROPER INTENDED USE

This SMD LED light is intended for indoor and outdoor mobile lighting.

SAFETY INSTRUCTIONS:

• Please read the operating instructions carefully prior to use and do not throw them away.
• Prior to each use, make sure the light and mains supply cable are not damaged in any way.
Never use the light if you find damage. In this case, please contact an electrician or write
to the service address provided by the manufacturer.
Caution! A damaged light or mains supply cable
pose a risk to life due to electric shock!
• Damaged protective covers must be replaced with an original brennenstuhl
spotlight can be used again.
• Before opening the device, may sure the light is disconnected from the power grid.
Risk of life due to electric shock!
• Do not use the work light in explosive environments in which flammable liquids, gases or dusts are present.
Risk to life!
• The light is spray water-resistant (IPx4). Never immerse the light or individual components in water or other
liquids. Risk of electric shock!
• Make sure the light is securely placed and stable. Make sure the cable is not crimped or otherwise damaged.
• Never network several lights in series. Risk to life due to overheating!
• Keep children away from the work light. Children cannot estimate the risk of electric shock.
• To prevent blinding, do not look directly into the light.
113015 BA_proLine SMD-LED Strahler.indd 5
www.professionalline.com
protective cover before the
®
09.06.17 15:57
5