brennenstuhl LB 5000 Mode D'emploi page 6

ILLUSTRATED COMPONENTS
OPERATION
Setting up and turning on the light
Place the light on a dry, flat surface. Only use the light with the
bracket extended. The adjustable bracket
A
several levels and can be used to set the light at different tilt angles.
Mounting the light on a tripod
The light can be mounted on a suitable tripod using the holes
on bracket (mounting material not included!). Make sure the tripod
A
is sufficiently stable and the light is securely mounted.
Switching the light on/off
Press the button to turn the light on. Press the
B
There are 2 outlets on the back of the light which allows it to be used as a power distributor.
The outlets also function when the light is turned off.
Cable holder and plug housing
The light is equipped with a cable holder
The plug can be fixated in the plug housing
6 www.brennenstuhl.com
113015 BA_proLine SMD-LED Strahler.indd 6
can be adjusted to
A
button again to turn the lamp off.
B
which can house the power cable during transport or storage.
D
.
E
A Folding clamp
B On/off button
C Outlets
D Cable holder
(may deviate from the illustration
depending on the model)
E Plug housing
30°
90°
60°
09.06.17 15:57