EMAK EF 95 Manuel D'utilisation Et D'entretien page 45

suddenly sink, throwing the machine off
balance.
- Towing or pushing loads without the use
of the specified towing hitch.
WARNING: The machine may be used
to tow certain simple accessories of
limited weight (see Accessories chapter).
Do not use the machine to tow objects
or accessories different from those
specified by the manufacturer; the
towed objected may overturn, resulting
in injury to the operator and damage to
property. Towed objects alter the weight
distribution of the machine, which may
itself overturn, particularly when going
up or downhill; when braking, a trailer
that is not fitted with brakes may strike
t h e m a c h i n e, c a u s i n g d a n g e ro u s
movements. Pay special attention when
towing accessories over hard surfaces.
Precautions for use of the machine
WARNING: Do not tamper with or
remove the safety devices fitted on
the machine. REMEMBER THAT THE
USER IS ALWAYS RESPONSIBLE FOR
DAMAGE AND INJURY CAUSED TO
OTHERS.
Before using the machine:
- R e a d t h e
recommendations, paying particular
attention to driving and cutting on
slopes,
- Carefully read the instructions for use,
make sure you are familiar with the
controls and know how to stop the blade
and the engine quickly.
WARNING
- If you encounter a situation where you
are uncertain how to proceed you
should ask an expert. Contact your
dealer or an Authorised Ser vice
Centre. Avoid all usage which you .
consider to be beyond your capability.
- Do not use the machine unless you are
able to call for help in the event of an
accident.
- Do not attempt to remove cut material
while the engine is running or the
cutter assembly is rotating, as this can
g e n e r a l s a f e t y
result in serious injury.
- Sometimes branches or grass may get
caught between the speed adjustment
pedals. Always stop the engine before
cleaning.
- Never leave the machine unattended
with the engine running or with the
ignition key inserted. Always stop the
blade, engage the parking brake,
switch off the engine and remove the
key. Stop the engine and remove the
ignition key before leaving the
machine, refuelling, carrying out
maintenance work or cleaning the
machine.
- The ride - on mower is a produc t
designed exclusively for cutting grass.
It is inadvisable to cut other types of
m a t e r i a l . A ny o t h e r u s a g e n o t
indicated in these instructions may
damage the machine and constitutes a
serious risk to people and property.
- Periodically check the condition and
pressure of the tyres; tyres that are in
poor condition or inflated to an
incorrect pressure may affect the
machine's weight distribution and
cause uneven grass cutting.
- T h e m a c h i n e m u s t u n d e r n o
circumstances be driven on, or even
across, public roadways.
- Never use the machine to tow or push
other objects.
- Operate the machine only in daylight or
well-lit conditions; keep the machine a
safe distance from holes and other
irregularities in the ground.
- Take great care when changing direction,
especially when working on slopes.
- Keep hands and feet well clear of the
rotating blades.
- Never lift or transport the machine when
the engine is running.
- Slow down the engine before switching
it off.
- Stop the machine if the blade strikes a
foreign object. Examine the unit and
repair any damaged parts.
- Before starting the engine, make sure the
cutter assembly is not in contact with
any object.
GB
45