TESTO 510 Mode D'emploi page 11

Short manual testo 510
Basic settings
Instrument off >press and hold
confirm with (
Unit of pressure/velocity: hPa, mbar, Pa, mmH2O, mmHg, psi, inH2O, inHG, m/s,
>
fpm Density of the medium (Density) > Auto off function: OFF, ON
Switching the instrument on
Press .
Switching the display light on (for 10s)
Instrument on > press
Select display mode
Instrument on > select with
Current reading > Hold: Readings are held > Max: Maximum values > Min: Minimum
values > Hold Avg: Timed mean value calculation, see below
Timed mean value calculation for flow
Press several times, until
- - - -
until appears > Releasing
the current readings are
displayed > End measurement: press
displayed.
Switching the instrument off:
Instrument on >press and hold

Protection cap: Park position

Differential pressure sensor
nipple connection

Display

Control keys

Battery compartment, holding
magnets (on rear)
2s > select with
):
:
and
Hold Avg
starts mean value calculation,
2s.
Short manual testo 510 11
( ),
appear > Hold
, the mean value is
down