Roland Mobile Cube Manuel Du Propriétaire page 7

3. VOLUME Knob
This adjusts the volume of the device
connected to the Keyboard/ Instrument/
Guitar input jack(s).
4. CHORUS Switch
Pressing the CHORUS switch will turn on the
chorus effect.
The MOBILE CUBE's chorus effect is
a spatially synthesized chorus that takes
advantage of stereo playback to generate
an expansive sensation.
What's spatially synthesized chorus
With spatially synthesized chorus,
a method available only in stereo, the
chorus effect is created by taking the
sound from the right speaker (from which
the effect sound is output), and the sound
from the left speaker (which outputs the
direct sound), and then mixing them in the
actual space. This creates a greater lateral
spread than that produced when the
sounds are mixed electronically,
providing a more natural sense of breadth.
AUX
5. CENTER CANCEL Switch
Pressing the CENTER CANCEL switch will
eliminate sounds (such as vocals or guitar
solos) located in the center of the stereo
source from the music CD or other device
connected to AUX IN. This is convenient
when you want to use the source for karaoke
or for guitar practice.
* For some stereo sources, it may not be possible to obtain
a sufficient cancellation effect.
TONE and DELAY/REVERB
* The effect applies only to the device connected to MIC and
to the KEYBOARD/ INSTRUMENT/ GUITAR input
jacks.
6. TONE Knob
This adjusts the tone. Turn the knob
clockwise for a brighter tone; to get a milder
tone, turn the knob counterclockwise.
7. DELAY/REVERB Knob
Turn this knob to DELAY or REVERB to
switch to that effect. Turn the knob to adjust
the amount of effect applied.
DELAY
Turn the knob to change the time and amount
of delay effects.
What's DELAY
A delay is a little bit like an echo, and by
repeating the original sound after it is played,
this effect can add a sense of spaciousness
and depth to the sound. In addition, when
this effect is applied to instruments that play
melodies, it can make their performance
sound smoother or can add an extra bounce
to their rhythm.
REVERB (Stereo REVERB)
Spacious-sounding stereo reverb is provided.
Turn the knob to adjust the reverb level.
What's REVERB
By adding reverberation to a sound, this
effect imbues the sound with a sense of
spaciousness and depth.
8. Power Indicator
This indicator lights when the unit is turned on.
* When operating on battery power only, the unit's indicator
will become dim during play when battery power gets too
low.
* Sounds may distort easily or may cut off when played at
high volume as the battery power begins to fade, but this is
normal and does not indicate a malfunction.
In such instances, either replace the batteries or use the AC
adaptor (sold separately).
Panel Descriptions
7