Arm / Disarm The System - ABB SAS-W 11c Série Guide Rapide

Busch-/ABB-secure@home
6.1

ARM / DISARM THE SYSTEM

From the Idle Screen it is possible to arm / disarm the system quickly by pressing
the button ::
All zones armed
1
User PIN:
The default GLOBAL ARM will put the entire system in Arm
Away mode, until a preferred mode / combination of zone
activation is defined, associated with this command.
Central Unit / Central Unit with GSM
48
*****
Global arm
CHAPTER
STATUS OF THE SYSTEM
Rev. 1.0
6