General Information; Used Symbols - ABB SAS-W 11c Série Guide Rapide

1
CHAPTER

GENERAL INFORMATION

1 GENERAL INFORMATION
Thank you for purchasing the secure@home system central unit.
This manual contains all the information necessary for a first configuration of the system
and commissioning by the installer.
The complete manual is available at the following address:
https://new.abb.com/low-voltage/products/building-
automation/product-range/intrusion-alarm-systems/system/
abb-secureathome
The programming procedures are described in the installation
manual, which is addressed exclusively to the technician
performing the installation of the system.
Installation, commissioning and maintenance of the device
must only be carried out by trained and properly qualified
electrical installers.
1.1

USED SYMBOLS

The following symbols point to dangers involved in the use of the device and provide
practical instructions:
WARNING!
This symbol in connection with the signal word "Warning"
indicates a dangerous situation which could lead to immediate
death or to serious injury.
ATTENTION!
This symbol indicates a possibly damaging situation for the
product.
Non-observance can lead to damage or destruction of the
product.
Information or references to additional useful topics. This is
not a signal word for a dangerous situation.
Installer or qualified electrician.
Central Unit / Central Unit with GSM
Rev. 1.0
Busch-/ABB-secure@home
31