VINCENT SV-123 Manuel D'utilisation page 28

18. Input selection buttons,
used for selecting the source (one of the
devices connected to CD, DVD, AUX, SACD,
LINE (13) or the built in TUNER), allowing
playback mode to be changed.
19. Numerical keys for operating the tuner
Numerical keys 0-9 for inputting the frequency
or selecting a station from the memory.
20. DIRECT
Once this knob is pressed, a known radio
station frequency can be input directly using
the numerical keys (19) when in radio mode.
21. AUTO MUTE
This activates or deactivates the volume mute
during the manual search process in radio
mode and suppresses noise from interference
between stations.
22. RDS
If the tuner is selected as the input channel, this
button can be used in FM mode to switch on
RDS (Radio Data System) for stations that
support this service. This allows various radio
station text services to be shown on the appli-
ance's display.
23. TUN/PRE
These keys are used to set a radio station in
tuner mode. Depending on the settings, the
"TUNING MODE" button (26) gives you
another selection function.
24. AM/FM
If "TUNER" is selected as the input, this button
is used to select one of the frequency bands,
AM (medium wave) or FM (VHF). A suitable
antenna for each mode must be connected to
the appliance (10)(11).
Vincent
28
BUTTONS REMOTE CONTROL
20
21
22
24
26
28
18
19
23
27
25
29